|
|
|
Pedestal Style
Tables
Square model Shown
Rectangular Model also available |
|
The Single Post Square Table has a vandal-resistant
design. Center post is made of 6" square tube which makes
this unit extra heavy-duty. The seat arms are 3-1/2" O.D.
pipe. The entire frame is hot-dip galvanized after
fabrication for long life. Support arms are tamper-resistant
because only the smooth heads of the carriage bolts can be
accessed from the outside. The nuts are hidden inside the
center post, so once the top is in place, they are
inaccessible. IN-GROUND is STANDARD on single post tables.
It extends approximately 20" into a concrete poured base.
For SURFACE MOUNT, add "SM" to
model no. and add $35.00 to the price. Leave off one or more
seats and use as wheelchair accessible.
Surface Types= Wood, Aluminum, Fiberglass, Vinyl
Plastisol (PVC), and Recycled Plastic |
 |
|
Round
Table has PVC coated #9 expanded metal top and seats in a variety of
colors. New frame style has 1 5/8" O.D. legs which can be powder
coated black,
("C" in model no.) or hot-dipped galvanized after
fabrication, ("G" in model no.).
"NOTE" Pedestal Model also Here
 |
Round or Square Tables |
|
Portable Tables
Excellent for poolside, patios, restaurants, outdoor eating,
housing projects, etc.. The frame design is made of 1-5/8"
O.D. high tensile galvanized tube. The seats have full
length steel supports and the tops have a steel reinforcing
"X" brace which attaches to the legs. Top can be furnished
with a hole for umbrella. Fiberglass tops and seats are
coated with Ultragel up to 20 mils thick for extra aesthetic
value and long life. Standard colors are red, yellow, blue,
green, champagne and white.
Surface Types= Wood, Aluminum, Fiberglass, Vinyl
Plastisol (PVC), and Recycled Plastic |
6J2GW shown |
|
The "J2" series
frame is
made of 2-3/8" O.D. schedule 40 pipe and is hot dip
galvanized after fabrication. Center cleat holds top level
and the 1-5/16" O.D. cross braces stabilize this extra heavy
frame. Convenient walk-thru design and welded rigidity can
stand up to rough use. Can be purchased with your choice of planking to make
complete table.
Surface Types= Wood, Aluminum, Fiberglass, Vinyl
Plastisol (PVC), and Recycled Plastic |
62BGW
shown |
|
The popular "2BG" model
is heavy duty at a reasonable price. It is made from 2-3/8"
high strength galvanized tube for greater resistance to
vandalism and many years of service. Cross braces are
1-5/16" O.D. galvanized tube and seat brackets are 10 ga.
galvanized steel.
Note: This table is not normally available in
Wheelchair Accessible.
Surface Types= Wood, Aluminum, Fiberglass, Vinyl
Plastisol (PVC), and Recycled Plastic |
8CJGWHC shown |
|
The "CJ" frame is made
of 1-5/8" O.D. schedule 40 pipe. It has a wide tip resistant
design which is welded for rigidity and then hot-dip
galvanized after fabrication. Top and seat cleats are 2" x
2" x 3/16" steel angles. Center cleat is 1-1/2" steel
channel which provides level top and sturdier attachment of
the 1-5/16" galvanized cross braces.
Wheelchair accessible model has 8 ft.
top (centered) and 6 ft. seats. To order use 8' model no.
and price, then add "HC" to the model no.. The tops on these
tables have approximately 20" of overhang on each end. A
1-1/2" steel channel cleat on each end keeps the lumber
level.
Surface Types= Wood, Aluminum, Fiberglass, Vinyl
Plastisol (PVC), and Recycled Plastic |
8J2GA-SEW shown |
|
These new models are designed so that you can have
wheelchair access from the side, end, or both on the same
table! Toe clearance on the tables in 24", width clearance
is 30", with 29" under the table top. Welded anti-tip
extensions (patent # 6116681) on the legs overcome the
possibility of upending a table with such a long overhang,
as required by ADA specs.
Surface Types= Wood, Aluminum, Fiberglass, Vinyl Plastisol
(PVC), and Recycled Plastic.
The frame is
made of 2-3/8" O.D. schedule 40 pipe and is hot
dip galvanized after fabrication. |
 |
|
|
Larger
Picture |
|
Oval Plastisol Coated Table
Item # 6OVPT,
$892.00
Oval Plastisol Table has 1 7/8 inch O.D.
tube frame and 3/4 inch x No. 9 expanded
metal tops and seats. Entire unit is
Plastisol coated for long life and
appearance. Specify color choice (s) when
ordering. Umbrella hole in center of top.
wt. 255 lbs
Length -
6 feet.
|
|
|
|
